Direct replacement carbon fiber panel for the front of your Decent espresso machine. Mirror lip is made from stainless steel and attaches using the two lower front panel screws and is easily removed for cleaning or replacing.
The carbon fiber panel is real carbon fiber - twill weave. Not an overlay, print or whatever. A protectant maybe required for long term protection against UV depending on your environment.
Comes with:
1x Carbon fiber panel
1x Polished stainless steel mirror lip
1x Set of screws (see machine version below)
V1.3 - 1.43a: Uses 3 screws to attach alongside the power button and steam wand. If you want to delete the screws for a screw-less look, you can use the 1.43b - V1.44+ version instead - see below.
1.43b - V1.44+: Same as above but the screw holes are replaced with foam tape as per Decent's design. Mirror is attached with VHB tape but tape for attaching to the machine is not included. Machines at this time still have screw holes in the chassis/behind the front cover and the V1.3 - 1.43a version is still compatible - you can verify by looking under the main cover.
Note:
Please check the photos to ensure compatibility. Photo with the kit installed is a custom panel with the water spout relocated.
The mirror lip is laser cut from polished sheet stock.
